VISION Z-Wave Siren Strobe With Power Supply
or make 4 interest-free payments of $32.25 AUD fortnightly with More info
The VISION Z-Wave Siren and Strobe DC is a wireless device capable of producing an audible and visual alarm.
- Blue LED flashing strobe light
- Loud (105dB @ 1m) audible alarm
- Low battery and tamper indicators
- Includes a 15V DC power supply
- Configurable with Z-Wave certified gateways
The VISION Z-Wave Siren and Strobe DC is a wireless device, fully programmable with Z-Wave gateways, capable of producing an audible and visual alarm based on your Z-Wave network settings.
This device is designed to operate alongside a Z-Wave enabled sensor which can detect a threat to your household.
The VISION Z-Wave Siren and Strobe DC also includes a battery status indicator which will notify you when its battery level is low and a tamper alarm which will alert the associated Z-Wave gateway if anyone attempts to tamper with this device.
This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:
- Vera Edge
- Vera Plus
- Fibaro Home Center 2/Lite
- Homeseer HS3
- REMOTEC Z-Wave Universal Remote Controller
- RaZberry Pi
Note: This device includes a 15V DC power supply.
Configuration Command Class:
Parameter 0: Siren/ Strobe Mode, 1 Byte
Value: 0=Siren and Strobe enabled (default), 1=Siren only, 2= Strobe only.
Parameter 1: Alarm auto stop time command, 1Byte
Value: 0=30 seconds (default), 1= 60 secs, 2= 120 secs, 3= Siren will not stop automatically.
|RF Protocol||Z‐Wave, Z-Wave Plus cerification|
|RF Frequency||921.42Mhz ‐ AU/NZ approved RF for Z‐Wave|
|Z‐Wave device type||Z-Wave binary switch|
|Internal Alarms||Tamper, Low Battery|
|Operating Voltage||9~24V DC / 6V Ni-MH CELL 150mAh (included)|
|Operation Range||Up to 30m indoor with no obstacles|
|Application||Indoor use only|
|Operation temperature||-5°C ~ 55°C|
Loud Audiable Alarm
||105dB @ 1meter|
||(H x W x D) 116mm x 77mm x 40mm|
We Also Recommend