PHILIO Z-Wave Plus Multi-Sensor
Quick Overview
The PHILIO Z-Wave Multi-Sensor is a battery powered, PIR, temperature and light level sensor, all in one small package.
- Z-Wave Plus certified
- Configurable temperature and light level report triggers
- Long battery life and low power reporting
- Supports Over the Air (OTA) firmware updates
The Finer Details
The PHILIO Z-Wave Multi-Sensor allows you to detect motion and to measure a room's ambient temperature and light intensity. When included into a Z-Wave network with a home automation controller or Z-Wave gateway it can be used to trigger scenes and activate other Z-Wave devices within your Z-Wave network. It can also alert the user of intruders via their Z-Wave gateway.
The PHILIOÂ Z-Wave Multi-Sensor supports Over the Air (OTA) firmware updates and reports its battery status making it very easy to maintain.
This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:
Vera Edge, Vera Plus, Vera Secure
- Fibaro Home Centre 2/Lite
Tech Specs
RF Protocol | ZWave Plus (500 series chip)
RF Frequency | 921.42Mhz AU/NZ approved RF for Zwave
ZWave device type | Z-Wave sensor
Power | CR123A Lithium battery (included)
Operation Range | Up to 40m indoors (with no obstacles)
Application | Indoor
Operation temperature | -10 ~ 40 °C
Storage temperature | 10 ~ 60 °C
Weight | 60g
Dimensions | 80mm x 27mm x 23mm
Housing | ABS
RF Frequency | 921.42Mhz AU/NZ approved RF for Zwave
ZWave device type | Z-Wave sensor
Power | CR123A Lithium battery (included)
Operation Range | Up to 40m indoors (with no obstacles)
Application | Indoor
Operation temperature | -10 ~ 40 °C
Storage temperature | 10 ~ 60 °C
Weight | 60g
Dimensions | 80mm x 27mm x 23mm
Housing | ABS
We Also Recommend
