FIBARO ZWave Single Switch 2nd Edition
Quick Overview
The Fibaro Z-Wave Single Switch 2 is a wireless Z-Wave module which can control appliances or lighting up to a maximum load of 2.0kW.
- Control the ON-OFF function of a circuit remotely or using a wall switch
- Compatible with all Z-Wave networks
- Acts as a repeater expanding your Z-Wave network
- Wide range of compatibility with existing light fittings and does NOT require expensive cabling
- control loads up to 2kW (8A)
The main differences in the FGS-213 are:
- Z-Wave Plus certification
- Has power monitoring
- 230V powered only (this is the same as the FGS-212)
- No dry contacts - this is important. It means that the new FGS-213 cannot be used to control low voltage systems such as garden lights and irrigation, or where you want a pure volt-free switch such as alarm panels and garage door controls.
Product Details
The Fibaro Z-Wave Single Switch 2 is a smart Z-Wave module capable of remotely operating your existing light fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.
The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician.
This Fibaro Z-Wave Single Switch 2 requires 3-wire (including neutral) installation and works with an AC (110-230V) or DC (24-60V) power supply.
The Fibaro Z-Wave Single Switch 2 also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits.
This product integrates with all Australian certified (921.42MHz) Z-Wave controllers
Product Specifications
|
RF Protocol |
Z‐Wave Plus |
|
RF Frequency |
921.42Mhz ‐ AU/NZ approved RF for Z‐wave |
|
Z‐Wave device type |
Z-Wave Switch, Routing Slave |
|
Power |
230V ± 10% 50/60 Hz |
|
Operation Range |
Up to 15m indoors with no obstacles |
|
Application |
Indoor use only, up to 2kW resistive load, 8A |
|
Operation temperature |
0 ~ 55 °C |
|
Storage temperature |
‐10 ~ 80 °C |
|
Weight |
50g |
|
Housing |
ABS |
|
Compliance |
EN 55015, EN 60669-2-1 |
|
Regulatory Compliance Mark |
N5496 |
|
Dimensions |
(LxWxH) 42mm x 37mm x 17mm |
We Also Recommend
