FIBARO ZWave Double Switch

$109.00
Save $10

or make 4 interest-free payments of $27.25 AUD fortnightly with More info

Description
Specifications
Downloads

The Fibaro Z-Wave Double Switch Controller is a wireless controller which can control two circuits each with a maximum load of 1.5kW per circuit.

Control the ON-OFF function of two two independent lights or appliances remotely or using a wall switch
Compatible with all Z-Wave networks
Acts as a repeater expanding your Z-Wave network
Wide range of compatibility with existing light fittings and does NOT require expensive cabling

The Fibaro Z-Wave Double Switch Controller (FGS-222) is a smart Z-Wave controller capable of remotely operating your existing light fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician.This Fibaro Z-Wave Double Switch Controller requires 3-wire (including neutral) installation and works with an AC (110-230V) or DC (24-60V) power supply. The controller is also compatible with many popular BELL PRESS type light fittings including Clipsal IMPRESS and SATURN wall switches.The Fibaro Z-Wave Double Switch Controller also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits.This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:

Vera 3/Lite
Raspberry PI with RaZberry Card
Fibaro Home Controller 2/Lite
DHS Z-Wave Universal Remote Controller
DHS Z-Wave Mini Remote Controller

Product Specifications

RF Protocol	Z‐Wave
RF Frequency	921.42Mhz ‐ AU/NZ approved RF for Z‐wave
Z‐Wave device type	Z-Wave Switch, Routing Slave
Power	110-230V ± 10% 50/60 Hz
Operation Range	Up to 15m indoors with no obstacles
Application	Indoor use only, up to 1.5kW resistive load per circuit
Operation temperature	0 ~ 55 °C
Storage temperature	‐10 ~ 80 °C
Weight	50g
Housing	ABS
Compliance	EN 55015, EN 60669-2-1
Regulatory Compliance Mark	N5496
Dimensions	(LxWxH) 42mm x 37mm x 17mm

Documents

Fibaro Double Relay Manual

Videos

We Also Recommend

FIBARO Z-Wave Dimmer 2 InWall - Capital Smarthomes

FIBARO Z-Wave Dimmer 2nd Edition

Save $10

FIBARO ZWave Double Switch 2nd Edition

Save $10

FIBARO Dimmer Bypass 2

FIBARO Z-Wave D/W Sensor 2nd Edition (Multiple colours available)

FIBARO Z-Wave Multi-Sensor

Save $10

Customer Reviews

Based on 1 review Write a review