Menu
Cart 0
FIBARO Z-Wave Dimmer 2 InWall - Capital Smarthomes

FIBARO Z-Wave Dimmer 2nd Edition

  • Save $10

or make 4 interest-free payments of $27.25 AUD fortnightly with Afterpay More info

The Fibaro Z-Wave In-Wall Dimmer 2 (FGD-212) is a newest version of a popular wireless controller designed to operate behind a wall switch.
  • Control the level of illumination of your light remotely or using a manual button (in two and three way configuration)
  • Implemented algorithm of smart light source detection
  • Acts as a repeater expanding your Z-Wave network
  • Wide range of compatibility with existing light fittings and does NOT require expensive re-wiring
  • Active power and energy metering functionality
  • Works with various types of manual buttons
  • Active element: semiconductor electronic switch
The Fibaro Z-Wave In-Wall Dimmer 2 is designed to operate with or without a neutral wire. It may be used as a switch in systems without a neutral wire.In case of 2-wire connection (no neutral), the Fibaro Z-Wave In-Wall Dimmer 2 may require a minimum load of 50W depending on specifics of the connected load.When used with a Fibaro Dimmer Bypass 2 it may operate with any compatible (see below) load from 5W. Before committing to buy Fibaro Dimmer Bypass 2 please check if your load can be properly controlled by Fibaro Dimmer 2 without bypass device.Do not connect this device to a power supply without a load. Only lighting devices may be connected to this device.As a dimmer it operates with the following loads:
  • 230V operated conventional incandescent (from 50W to 250W)
  • 230V operated halogen (from 50W to 200W)
  • 12 V operated ELV halogen lamps and dimmable LED lamps (with electronic transformers: Trailing and Leading edge type) (from 50W to 200W)
  • 12V operated MLV halogen lamps (with fromagnetic transformers) (from 50W to 225W)
  • Dimmable CFL tube lamps with electronic ballast only (from 50W to 200W)
As a switch it operates with the following loads:
  • Compact fluorescent lamps with electronic ballast
  • LED bulbs (power factor >0.7)
  • Fluorescent tube lamps with electronic ballast
Please note: For loads other than resistive do not exceed a 1.5A current.This product integrates with all Australian certified (921.42 MHz) Z-Wave and Z-Wave Plus controllers including:
  • Vera 3/ Lite / Edge
  • Fibaro Home Center 2  / Lite

Technical Specifications

RF Protocol

Z‐Wave Plus

RF Frequency

921.42Mhz ‐ AU/NZ  approved RF for Z‐wave

Z‐wave device type

Z-Wave multiple level dimmer, routing slave

Power Supply

220 - 240V ~ 50Hz

Operation Range

Up to 30m indoors (depending on building materials)

Application

Indoor use only

Operation temperature

0 ~ 35 °C

Dimensions (L x W x H)

42.5mm x 38.25mm x 20.3mm

Weight

30g

Operational Current

0.25 - 1.1A

Compliance

RCM E3606

Dimming type compatibility

Leading and Trailing Edge

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

We Also Recommend
FIBARO ZWave Double Switch 2nd Edition

FIBARO ZWave Double Switch 2nd Edition

Save $10
FIBARO Dimmer Bypass 2 - Capital Smarthomes - 1

FIBARO Dimmer Bypass 2
FIBARO Z-Wave D/W Sensor 2nd Edition (Multiple colours available)

FIBARO Z-Wave D/W Sensor 2nd Edition (Multiple colours available)
FIBARO ZWave Double Switch InWall - Capital Smarthomes

FIBARO ZWave Double Switch

Save $10
FIBARO Z-Wave Multi-Sensor - Capital Smarthomes

FIBARO Z-Wave Multi-Sensor

Save $10

Customer Reviews

Based on 1 review Write a review