
VISION Z-Wave Siren Strobe
Quick Overview
The VISION Z-Wave Siren and Strobe is a wireless device capable of producing an audible and visual alarm.
- Red LED flashing strobe light
- Loud (105dB @ 1m) audible alarm
- Low battery and tamper indicators
- Configurable with Z-Wave certified gateways
Product Details
The VISION Z-Wave Siren and Strobe is a wireless device, fully programmable with Z-Wave gateways, capable of producing an audible and visual alarm based on your Z-Wave network settings.
This device is designed to operate alongside a Z-Wave enabled sensor which can detect a threat to your household. We recommend selecting any of the sensors below to suit your current needs:
The VISION Z-Wave Siren and Strobe also includes a battery status indicator which will notify you when its battery level is low and a tamper alarm which will alert the associated Z-Wave gateway if anyone attempts to tamper with this device.
This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:
- Vera Edge
- Vera Plus
- Fibaro Home Center 2/Lite
- Homeseer HS3
- REMOTEC Z-Wave Universal Remote Controller
- RaZberry Pi
Product Support
Configuration Command Class:
Parameter 0: Siren/ Strobe Mode, 1 Byte
Value: 0=Siren and Strobe enabled (default), 1=Siren only, 2= Strobe only.
Parameter 1: Alarm auto stop time command, 1Byte
Value: 0=30 seconds (default), 1= 60 secs, 2= 120 secs, 3= Siren will not stop automatically.
Technical Specifications
RF Protocol | Z‐Wave |
RF Frequency | 921.42Mhz ‐ AU/NZ approved RF for Z‐Wave |
Z‐Wave device type | Z-Wave binary switch |
Internal Alarms | Tamper, Low Battery |
Operating Voltage | 4 x AA batteries |
Connection Type | Wireless |
Operation Range | Up to 30m indoor with no obstacles |
Application | Indoor use only |
Operation temperature | -5°C ~ 55°C |
Loud Audiable Alarm |
105dB @ 1meter |
Weight | 290g |
Housing | ABS |
Dimensions |
(H x W x D) 116mm x 77mm x 40mm |
Compliance | RCM, CE |
We Also Recommend